ALW-XYDZ 700型晶棒XY轴X射线定向粘料仪
ALW-XYDZ 700 MODEL STICKING INGOT X-RAY ORIENTATION INSTRUMENT BY X&Y AXIS
产品特点
该仪器为双工作台，左侧工作台在X光下对（2~6）英寸蓝宝石晶棒X轴定向，晶棒长度最短为20mm，利用导轨滑动在一块料板上，粘结多块晶棒；右侧工作台在X光下利用专用工具对（2~6）英寸蓝宝石晶棒Y轴角度定向，然后将晶棒和夹具一起放到磨床进行参考面的玻璃面进行磨平、加工。仪器定向粘结精度±15"/30"，最小读数1"
Features
The instrument included double workbench,the left workbench can adhesive 2~6 inches sapphire ingot with the X-ray orientation unit,the minimum length of ingot is 20mm,and use the guide's glid to adhesive more ingot at a piece flitch ; The right workbench can test the end plane angle of 2~6 inches sapphire ingot or wafer with the X-ray orientation unit, wiht accuracy ±15"/30", the minimum reading by 1".
技术指标
●输入电源：单相交流220V，50Hz，0.25kW
●X射线管：铜靶，风扇冷却，阳极接地。
●管电压电流：30kV，5mA连续可调，使用2.0mA以上，
有可能损坏X光管并加大辐射危害。
●探测器：计数器。工作电压为DC1000V；或闪烁探测器，
工作电压为DC1200V。
●时间常数：1（快）、2（慢）两档。
●测角范围：2θ=－10°～110°，θ=－5°～55°
●角度读数：数字显示以度、分、秒表示，最小读数为1″。
数字显示以度显示，最小读数为0.001°。
●角度调整：数位显示可予置在任何角度上。
●主光闸：手动。
●显示板：角度显示，射线强度表。
●综合精度：双衍射型综合精度±15″或±30″。
（用标准石英片测量）。
●外型尺寸：1132（长）×642（宽）×1460（高）mm
●重量：300kg
Technical Parameters
●Input power: Single phase with AC 220V,50Hz,0.25kW
●X-ray tube : Cu target ,cooled by fan ,and plus earth
●Max.tube voltage and current: 30kV ,5mA ,being continued adjustment. If using the current is more than 2.0mA ,which may be damaged the X-ray tube inserted and enlarge the radiative harm
●Detector: counter. The max. working voltage is DC1000V; Or scintillation counter,the max. working voltage is DC1200V
●Time setting : 1(fast)/2(slow)
●Angle range: 2θ=－10°～120°，θ=－5°～60°
●Angle reading : Digital displaying in minutes or seconds,
the minimum reading to 1"
Digital displaying in degree ,
the minimum reading to 0.001°
●Angle adjustment: Digital displaying can be set in the any angle .
●Main optical shutter: by manual
●Displaying :Angle displaying ,and Ray intensity table
●Comprehensive precision: double diffraction comprehensive accuracy±15″or±30″.(Measured with standard quartz ).
●External dimension :1132(L) ×642（W）×1460（H）mm
●Weight:300kg